Do Kawasaki 730v And 691v Take Same Oil Filter

The Kawasaki FR730V is a 0.73 l (726 cc, 44.iii cu-in) 5-twin 90° air-cooled 4-stroke internal combustion modest gasoline engine with vertical shaft, manufactured by Kawasaki Heavy Industries LTd., for full general-purpose applications, such as residential nada-turn mowers, lawn and garden tractors.

The FR730V has 90 degrees Five-twin pattern with vertical PTO shaft, overhead valves, bandage iron cylinder liners, spherical combustion chamber and rotating metal grass chopper screen. The engine is equipped with an internally vented carburetor with fuel close-off solenoid and equipped with the electronic spark ignition organisation. The motor uses a high-performance lubrication organization and single-stage air filter.

The engine has bendix blazon electrical starter with automatic pinch release (ACR) system. 13A or 20A charge coils are available equally an option.

Information technology has a 78.0 mm (3.07 in) cylinder diameter and 76.0 mm (ii.99 in) piston stroke. Compression ratio rating is 8.2:1. The Kawasaki FR730V produced 22.6 PS (xvi.6 kW; 22.2 HP) at 3,600 rpm or 24.3 PS (17.ix kW; 24.0 HP) at 3,600 rpm and of maximum horsepower and 54.3 Nm (v.5 kg·g; 40.0 ft·lb) at two,000 rpm or 53.9 Nm (5.5 kg·m; 39.8 ft·lb) at 2,200 rpm of torque.

Full general information

Engine Specifications
Model	FR730V
Blazon	4-stroke, OHV, 5-twin 90°
Deportation	726 cm ³ (44.3 cu-in)
Max. horsepower	22.6 PS (16.6 KW; 22.2 HP) at 3,600 rpm 24.three PS (17.nine KW; 24.0 HP) at three,600 rpm
Max. torque (creepo PTO)	54.3 Nm (v.5 kg·m; 40.0 ft·lb) at 2,000 rpm 53.9 Nm (five.5 kg·m; 39.8 ft·lb) at 2,200 rpm
Carburetor	Internally vented with fuel shut-off solenoid
Cooling system	Air-cooling
Ignition system	Electronic spark ignition
Lubricating system	Full pressure level with spin-on oil filter
Starting system	Bendix type starter
Charging organisation	13A or 20A charge curlicue (pick)
Fuel used	Unleaded gasoline (octane number 86 or higher)
Fuel consumption	245 1000/HPh
Cooling system	Pressurized forced circulation type

Dimensions and Weight

	Kawasaki FR730V
Length, mm (in)	501 (19.seven)
Width, mm (in)	466 (18.three)
Height, mm (in)	392 (15.four)
Dry weight, kg (lb)	xl.0 (88.ii)

Tightening torque specs

Tightening torque specs
Cylinder head	46 Nm; 4.6 kg·m; 33.nine ft·lb
Connecting rod	10 Nm; one.0 kg·m; 7.iv ft·lb
Flywheel	56 Nm; 5.7 kg·grand; 41.3 ft·lb
Crankcase embrace	27.five Nm; two.75 kg·m; xx.3 ft·lb
Intake manifold	nine Nm; 0.9 kg·m; 6.6 ft·lb
Oil drain plug	7 Nm; 0.seven kg·chiliad; 5.two ft·lb
Valve clearance lock nut	xi Nm; 1.1 kg·m; viii.ane ft·lb

Maintenance data

Engine
Maximum speed	3500 ± 100 rpm
Idle speed	1500 ± 100 rpm
Cylinder compression	4.5 kg/cm² (64 psi) at 500 rpm
Valve clearance
Intake valve	0.ten-0.15 mm (0.004-0.006 in)
Exhaust valve	0.x-0.15 mm (0.004-0.006 in)
Oil system
Oil blazon	4-stroke or an equivalent (SJ or higher class)
Recommended oil	SAE 10W-40, 10W-30
Oil capacity (with filter changed)	With oil filter: 2.1 litre Without oil filter: ane.8 litre
Ignition system
Spark plug	NGK: BPR4ES
Spark plug gap	0.7-0.eight mm (0.027-0.031 in)
Ignition coil air gap	0.2-0.iv mm (0.008-0.011 in)
Spark plug tightening torque	22 Nm; 2.ii kg·m; 16.2 ft·lb

ATTENTION! Dear visitors, this site is non a trading platform, an official dealer or a spare parts supplier, and then we exercise not accept whatever price lists or spare parts catalogs. Nosotros are an data portal and provide the technical specifications of gasoline and diesel engines.

We try to use verified sources and official documentation, notwithstanding, differences betwixt sources or errors in entering information may occur. Nosotros do not provide advice on technical problems related to the engines functioning or repair. We practice not recommend using provided information for engines repairing engines or spare parts ordering, employ only official service manuals and spare-parts catalogs.